logan/CH32V00x
1
0
Fork 0
forked from WCH-Templates/CH32V00x
Code Pull requests Activity
CH32V00x/Peripheral/src/ch32v00x_flash.c
Quantum 267aa0534d
Initial Commit
2023-01-22 14:31:21 -05:00

834 lines
25 KiB
C
Raw Blame History

/********************************** (C) COPYRIGHT *******************************
* File Name : ch32v00x_flash.c
* Author : WCH
* Version : V1.0.0
* Date : 2022/08/08
* Description : This file provides all the FLASH firmware functions.
* Copyright (c) 2021 Nanjing Qinheng Microelectronics Co., Ltd.
* SPDX-License-Identifier: Apache-2.0
***************************************************************************************/
#include <ch32v00x_flash.h>
/* Flash Access Control Register bits */
#define ACR_LATENCY_Mask ((uint32_t)0x00000038)
/* Flash Control Register bits */
#define CR_PG_Set ((uint32_t)0x00000001)
#define CR_PG_Reset ((uint32_t)0xFFFFFFFE)
#define CR_PER_Set ((uint32_t)0x00000002)
#define CR_PER_Reset ((uint32_t)0xFFFFFFFD)
#define CR_MER_Set ((uint32_t)0x00000004)
#define CR_MER_Reset ((uint32_t)0xFFFFFFFB)
#define CR_OPTPG_Set ((uint32_t)0x00000010)
#define CR_OPTPG_Reset ((uint32_t)0xFFFFFFEF)
#define CR_OPTER_Set ((uint32_t)0x00000020)
#define CR_OPTER_Reset ((uint32_t)0xFFFFFFDF)
#define CR_STRT_Set ((uint32_t)0x00000040)
#define CR_LOCK_Set ((uint32_t)0x00000080)
#define CR_PAGE_PG ((uint32_t)0x00010000)
#define CR_PAGE_ER ((uint32_t)0x00020000)
#define CR_BUF_LOAD ((uint32_t)0x00040000)
#define CR_BUF_RST ((uint32_t)0x00080000)
/* FLASH Status Register bits */
#define SR_BSY ((uint32_t)0x00000001)
#define SR_WRPRTERR ((uint32_t)0x00000010)
#define SR_EOP ((uint32_t)0x00000020)
/* FLASH Mask */
#define RDPRT_Mask ((uint32_t)0x00000002)
#define WRP0_Mask ((uint32_t)0x000000FF)
#define WRP1_Mask ((uint32_t)0x0000FF00)
#define WRP2_Mask ((uint32_t)0x00FF0000)
#define WRP3_Mask ((uint32_t)0xFF000000)
/* FLASH Keys */
#define RDP_Key ((uint16_t)0x00A5)
#define FLASH_KEY1 ((uint32_t)0x45670123)
#define FLASH_KEY2 ((uint32_t)0xCDEF89AB)
/* FLASH BANK address */
#define FLASH_BANK1_END_ADDRESS ((uint32_t)0x807FFFF)
/* Delay definition */
#define EraseTimeout ((uint32_t)0x000B0000)
#define ProgramTimeout ((uint32_t)0x00002000)
/* Flash Program Vaild Address */
#define ValidAddrStart (FLASH_BASE)
#define ValidAddrEnd (FLASH_BASE + 0x4000)
/********************************************************************************
* @fn FLASH_SetLatency
*
* @brief Sets the code latency value.
*
* @param FLASH_Latency - specifies the FLASH Latency value.
* FLASH_Latency_0 - FLASH Zero Latency cycle
* FLASH_Latency_1 - FLASH One Latency cycle
* FLASH_Latency_2 - FLASH Two Latency cycles
*
* @return None
*/
void FLASH_SetLatency(uint32_t FLASH_Latency)
{
uint32_t tmpreg = 0;
tmpreg = FLASH->ACTLR;
tmpreg &= ACR_LATENCY_Mask;
tmpreg |= FLASH_Latency;
FLASH->ACTLR = tmpreg;
}
/********************************************************************************
* @fn FLASH_Unlock
*
* @brief Unlocks the FLASH Program Erase Controller.
*
* @return None
*/
void FLASH_Unlock(void)
{
/* Authorize the FPEC of Bank1 Access */
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
}
/********************************************************************************
* @fn FLASH_Lock
*
* @brief Locks the FLASH Program Erase Controller.
*
* @return None
*/
void FLASH_Lock(void)
{
FLASH->CTLR |= CR_LOCK_Set;
}
/********************************************************************************
* @fn FLASH_ErasePage
*
* @brief Erases a specified FLASH page(1KB).
*
* @param Page_Address - The page address to be erased.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ErasePage(uint32_t Page_Address)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_PER_Set;
FLASH->ADDR = Page_Address;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
FLASH->CTLR &= CR_PER_Reset;
}
return status;
}
/********************************************************************************
* @fn FLASH_EraseAllPages
*
* @brief Erases all FLASH pages.
*
* @return FLASH Status - The returned value can be:FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EraseAllPages(void)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_MER_Set;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
FLASH->CTLR &= CR_MER_Reset;
}
return status;
}
/********************************************************************************
* @fn FLASH_EraseOptionBytes
*
* @brief Erases the FLASH option bytes.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EraseOptionBytes(void)
{
uint16_t rdptmp = RDP_Key;
FLASH_Status status = FLASH_COMPLETE;
if(FLASH_GetReadOutProtectionStatus() != RESET)
{
rdptmp = 0x00;
}
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR &= CR_OPTER_Reset;
FLASH->CTLR |= CR_OPTPG_Set;
OB->RDPR = (uint16_t)rdptmp;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
else
{
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
}
return status;
}
/*********************************************************************
* @fn FLASH_ProgramWord
*
* @brief Programs a word at a specified address.
*
* @param Address - specifies the address to be programmed.
* Data - specifies the data to be programmed.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramWord(uint32_t Address, uint32_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
__IO uint32_t tmp = 0;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_PG_Set;
*(__IO uint16_t *)Address = (uint16_t)Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
tmp = Address + 2;
*(__IO uint16_t *)tmp = Data >> 16;
status = FLASH_WaitForLastOperation(ProgramTimeout);
FLASH->CTLR &= CR_PG_Reset;
}
else
{
FLASH->CTLR &= CR_PG_Reset;
}
}
return status;
}
/*********************************************************************
* @fn FLASH_ProgramHalfWord
*
* @brief Programs a half word at a specified address.
*
* @param Address - specifies the address to be programmed.
* Data - specifies the data to be programmed.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramHalfWord(uint32_t Address, uint16_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_PG_Set;
*(__IO uint16_t *)Address = Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
FLASH->CTLR &= CR_PG_Reset;
}
return status;
}
/*********************************************************************
* @fn FLASH_ProgramOptionByteData
*
* @brief Programs a half word at a specified Option Byte Data address.
*
* @param Address - specifies the address to be programmed.
* Data - specifies the data to be programmed.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ProgramOptionByteData(uint32_t Address, uint8_t Data)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
FLASH->CTLR |= CR_OPTPG_Set;
*(__IO uint16_t *)Address = Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
return status;
}
/*********************************************************************
* @fn FLASH_EnableWriteProtection
*
* @brief Write protects the desired sectors
*
* @param FLASH_Sectors - specifies the address of the pages to be write protected.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_EnableWriteProtection(uint32_t FLASH_Pages)
{
uint16_t WRP0_Data = 0xFFFF, WRP1_Data = 0xFFFF;
FLASH_Status status = FLASH_COMPLETE;
FLASH_Pages = (uint32_t)(~FLASH_Pages);
WRP0_Data = (uint16_t)(FLASH_Pages & WRP0_Mask);
WRP1_Data = (uint16_t)((FLASH_Pages & WRP1_Mask) >> 8);
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
FLASH->CTLR |= CR_OPTPG_Set;
if(WRP0_Data != 0xFF)
{
OB->WRPR0 = WRP0_Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
}
if((status == FLASH_COMPLETE) && (WRP1_Data != 0xFF))
{
OB->WRPR1 = WRP1_Data;
status = FLASH_WaitForLastOperation(ProgramTimeout);
}
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
return status;
}
/*********************************************************************
* @fn FLASH_ReadOutProtection
*
* @brief Enables or disables the read out protection.
*
* @param Newstate - new state of the ReadOut Protection(ENABLE or DISABLE).
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_ReadOutProtection(FunctionalState NewState)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
FLASH->CTLR |= CR_OPTER_Set;
FLASH->CTLR |= CR_STRT_Set;
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR &= CR_OPTER_Reset;
FLASH->CTLR |= CR_OPTPG_Set;
if(NewState != DISABLE)
{
OB->RDPR = 0x00;
}
else
{
OB->RDPR = RDP_Key;
}
status = FLASH_WaitForLastOperation(EraseTimeout);
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
else
{
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTER_Reset;
}
}
}
return status;
}
/*********************************************************************
* @fn FLASH_UserOptionByteConfig
*
* @brief Programs the FLASH User Option Byte - IWDG_SW / RST_STOP / RST_STDBY.
*
* @param OB_IWDG - Selects the IWDG mode
* OB_IWDG_SW - Software IWDG selected
* OB_IWDG_HW - Hardware IWDG selected
* OB_STOP - Reset event when entering STOP mode.
* OB_STOP_NoRST - No reset generated when entering in STOP
* OB_STOP_RST - Reset generated when entering in STOP
* OB_STDBY - Reset event when entering Standby mode.
* OB_STDBY_NoRST - No reset generated when entering in STANDBY
* OB_STDBY_RST - Reset generated when entering in STANDBY
* OB_RST - Selects the reset IO mode and Ignore delay time
* OB_RST_NoEN - Reset IO disable (PD7)
* OB_RST_EN_DT12ms - Reset IO enable (PD7) and Ignore delay time 12ms
* OB_RST_EN_DT1ms - Reset IO enable (PD7) and Ignore delay time 1ms
* OB_RST_EN_DT128ms - Reset IO enable (PD7) and Ignore delay time 128ms
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP, FLASH_COMPLETE or FLASH_TIMEOUT.
*/
FLASH_Status FLASH_UserOptionByteConfig(uint16_t OB_IWDG, uint16_t OB_STOP, uint16_t OB_STDBY, uint16_t OB_RST)
{
FLASH_Status status = FLASH_COMPLETE;
FLASH->OBKEYR = FLASH_KEY1;
FLASH->OBKEYR = FLASH_KEY2;
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status == FLASH_COMPLETE)
{
FLASH->CTLR |= CR_OPTPG_Set;
OB->USER = OB_IWDG | (uint16_t)(OB_STOP | (uint16_t)(OB_STDBY | (uint16_t)(OB_RST | (uint16_t)0xE0)));
status = FLASH_WaitForLastOperation(ProgramTimeout);
if(status != FLASH_TIMEOUT)
{
FLASH->CTLR &= CR_OPTPG_Reset;
}
}
return status;
}
/*********************************************************************
* @fn FLASH_GetUserOptionByte
*
* @brief Returns the FLASH User Option Bytes values.
*
* @return The FLASH User Option Bytes values:IWDG_SW(Bit0), RST_STOP(Bit1)
* and RST_STDBY(Bit2).
*/
uint32_t FLASH_GetUserOptionByte(void)
{
return (uint32_t)(FLASH->OBR >> 2);
}
/*********************************************************************
* @fn FLASH_GetWriteProtectionOptionByte
*
* @brief Returns the FLASH Write Protection Option Bytes Register value.
*
* @return The FLASH Write Protection Option Bytes Register value.
*/
uint32_t FLASH_GetWriteProtectionOptionByte(void)
{
return (uint32_t)(FLASH->WPR);
}
/*********************************************************************
* @fn FLASH_GetReadOutProtectionStatus
*
* @brief Checks whether the FLASH Read Out Protection Status is set or not.
*
* @return FLASH ReadOut Protection Status(SET or RESET)
*/
FlagStatus FLASH_GetReadOutProtectionStatus(void)
{
FlagStatus readoutstatus = RESET;
if((FLASH->OBR & RDPRT_Mask) != (uint32_t)RESET)
{
readoutstatus = SET;
}
else
{
readoutstatus = RESET;
}
return readoutstatus;
}
/*********************************************************************
* @fn FLASH_ITConfig
*
* @brief Enables or disables the specified FLASH interrupts.
*
* @param FLASH_IT - specifies the FLASH interrupt sources to be enabled or disabled.
* FLASH_IT_ERROR - FLASH Error Interrupt
* FLASH_IT_EOP - FLASH end of operation Interrupt
* NewState - new state of the specified Flash interrupts(ENABLE or DISABLE).
*
* @return FLASH Prefetch Buffer Status (SET or RESET).
*/
void FLASH_ITConfig(uint32_t FLASH_IT, FunctionalState NewState)
{
if(NewState != DISABLE)
{
FLASH->CTLR |= FLASH_IT;
}
else
{
FLASH->CTLR &= ~(uint32_t)FLASH_IT;
}
}
/*********************************************************************
* @fn FLASH_GetFlagStatus
*
* @brief Checks whether the specified FLASH flag is set or not.
*
* @param FLASH_FLAG - specifies the FLASH flag to check.
* FLASH_FLAG_BSY - FLASH Busy flag
* FLASH_FLAG_WRPRTERR - FLASH Write protected error flag
* FLASH_FLAG_EOP - FLASH End of Operation flag
* FLASH_FLAG_OPTERR - FLASH Option Byte error flag
*
* @return The new state of FLASH_FLAG (SET or RESET).
*/
FlagStatus FLASH_GetFlagStatus(uint32_t FLASH_FLAG)
{
FlagStatus bitstatus = RESET;
if(FLASH_FLAG == FLASH_FLAG_OPTERR)
{
if((FLASH->OBR & FLASH_FLAG_OPTERR) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
else
{
if((FLASH->STATR & FLASH_FLAG) != (uint32_t)RESET)
{
bitstatus = SET;
}
else
{
bitstatus = RESET;
}
}
return bitstatus;
}
/*********************************************************************
* @fn FLASH_ClearFlag
*
* @brief Clears the FLASH's pending flags.
*
* @param FLASH_FLAG - specifies the FLASH flags to clear.
* FLASH_FLAG_WRPRTERR - FLASH Write protected error flag
* FLASH_FLAG_EOP - FLASH End of Operation flag
*
* @return none
*/
void FLASH_ClearFlag(uint32_t FLASH_FLAG)
{
FLASH->STATR = FLASH_FLAG;
}
/*********************************************************************
* @fn FLASH_GetStatus
*
* @brief Returns the FLASH Status.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_GetStatus(void)
{
FLASH_Status flashstatus = FLASH_COMPLETE;
if((FLASH->STATR & FLASH_FLAG_BSY) == FLASH_FLAG_BSY)
{
flashstatus = FLASH_BUSY;
}
else
{
if((FLASH->STATR & FLASH_FLAG_WRPRTERR) != 0)
{
flashstatus = FLASH_ERROR_WRP;
}
else
{
flashstatus = FLASH_COMPLETE;
}
}
return flashstatus;
}
/*********************************************************************
* @fn FLASH_GetBank1Status
*
* @brief Returns the FLASH Bank1 Status.
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_GetBank1Status(void)
{
FLASH_Status flashstatus = FLASH_COMPLETE;
if((FLASH->STATR & FLASH_FLAG_BANK1_BSY) == FLASH_FLAG_BSY)
{
flashstatus = FLASH_BUSY;
}
else
{
if((FLASH->STATR & FLASH_FLAG_BANK1_WRPRTERR) != 0)
{
flashstatus = FLASH_ERROR_WRP;
}
else
{
flashstatus = FLASH_COMPLETE;
}
}
return flashstatus;
}
/*********************************************************************
* @fn FLASH_WaitForLastOperation
*
* @brief Waits for a Flash operation to complete or a TIMEOUT to occur.
*
* @param Timeout - FLASH programming Timeout
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_WaitForLastOperation(uint32_t Timeout)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_GetBank1Status();
while((status == FLASH_BUSY) && (Timeout != 0x00))
{
status = FLASH_GetBank1Status();
Timeout--;
}
if(Timeout == 0x00)
{
status = FLASH_TIMEOUT;
}
return status;
}
/*********************************************************************
* @fn FLASH_WaitForLastBank1Operation
*
* @brief Waits for a Flash operation on Bank1 to complete or a TIMEOUT to occur.
*
* @param Timeout - FLASH programming Timeout
*
* @return FLASH Status - The returned value can be: FLASH_BUSY, FLASH_ERROR_PG,
* FLASH_ERROR_WRP or FLASH_COMPLETE.
*/
FLASH_Status FLASH_WaitForLastBank1Operation(uint32_t Timeout)
{
FLASH_Status status = FLASH_COMPLETE;
status = FLASH_GetBank1Status();
while((status == FLASH_FLAG_BANK1_BSY) && (Timeout != 0x00))
{
status = FLASH_GetBank1Status();
Timeout--;
}
if(Timeout == 0x00)
{
status = FLASH_TIMEOUT;
}
return status;
}
/*********************************************************************
* @fn FLASH_Unlock_Fast
*
* @brief Unlocks the Fast Program Erase Mode.
*
* @return none
*/
void FLASH_Unlock_Fast(void)
{
/* Authorize the FPEC of Bank1 Access */
FLASH->KEYR = FLASH_KEY1;
FLASH->KEYR = FLASH_KEY2;
/* Fast program mode unlock */
FLASH->MODEKEYR = FLASH_KEY1;
FLASH->MODEKEYR = FLASH_KEY2;
}
/*********************************************************************
* @fn FLASH_Unlock_Fast
*
* @brief Unlocks the Fast Program Erase Mode.
*
* @return none
*/
void FLASH_Lock_Fast(void)
{
FLASH->CTLR |= CR_LOCK_Set;
}
/*********************************************************************
* @fn FLASH_BufReset
*
* @brief Flash Buffer reset.
*
* @return none
*/
void FLASH_BufReset(void)
{
FLASH->CTLR |= CR_PAGE_PG;
FLASH->CTLR |= CR_BUF_RST;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_PG;
}
/*********************************************************************
* @fn FLASH_BufLoad
*
* @brief Flash Buffer load(4Byte).
*
* @param Address - specifies the address to be programmed.
* Data0 - specifies the data0 to be programmed.
*
* @return none
*/
void FLASH_BufLoad(uint32_t Address, uint32_t Data0)
{
if((Address >= ValidAddrStart) && (Address < ValidAddrEnd))
{
FLASH->CTLR |= CR_PAGE_PG;
*(__IO uint32_t *)(Address) = Data0;
FLASH->CTLR |= CR_BUF_LOAD;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_PG;
}
}
/*********************************************************************
* @fn FLASH_ErasePage_Fast
*
* @brief Erases a specified FLASH page (1page = 64Byte).
*
* @param Page_Address - The page address to be erased.
*
* @return none
*/
void FLASH_ErasePage_Fast(uint32_t Page_Address)
{
if((Page_Address >= ValidAddrStart) && (Page_Address < ValidAddrEnd))
{
FLASH->CTLR |= CR_PAGE_ER;
FLASH->ADDR = Page_Address;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_ER;
}
}
/*********************************************************************
* @fn FLASH_ProgramPage_Fast
*
* @brief Program a specified FLASH page (1page = 64Byte).
*
* @param Page_Address - The page address to be programed.
*
* @return none
*/
void FLASH_ProgramPage_Fast(uint32_t Page_Address)
{
if((Page_Address >= ValidAddrStart) && (Page_Address < ValidAddrEnd))
{
FLASH->CTLR |= CR_PAGE_PG;
FLASH->ADDR = Page_Address;
FLASH->CTLR |= CR_STRT_Set;
while(FLASH->STATR & SR_BSY)
;
FLASH->CTLR &= ~CR_PAGE_PG;
}
}
/*********************************************************************
* @fn SystemReset_StartMode
*
* @brief Start mode after system reset.
*
* @param Mode - Start mode.
* Start_Mode_USER - USER start after system reset
* Start_Mode_BOOT - Boot start after system reset
* @return none
*/
void SystemReset_StartMode(uint32_t Mode)
{
FLASH_Unlock();
FLASH->BOOT_MODEKEYR = FLASH_KEY1;
FLASH->BOOT_MODEKEYR = FLASH_KEY2;
FLASH->STATR |= (1<<15);
FLASH->STATR &= ~(1<<14);
FLASH->STATR |= (1<<14);
FLASH_Lock();
}
View git blame Copy permalink