The frontend has now been secured far better. It now uses its own user

account with limited permissions. Openbox's menu also does not allow the
user to open potentially dangerous programs anymore.

OctoPrint account no longer randomizes its password as it is more
secure to have it not have one at all.

Condensed Nginx listening address interpreter.

Frontend check to see if Nginx and OctoPrint has been improved. It
should now be reliable.

Added touchscreen calibration.

Octo-config service menu is now deeper, which results in a cleaner
interface.

Octo-config now has a somewhat crude system health checking menu.

MJPG's resolution and framerate can now be configured.

Updated TODO

Dockerfile

@@ -6,8 +6,8 @@ RUN apt-get -y update && \
     apt-get -y install --no-install-recommends \
         git vim parted \
         quilt coreutils qemu-user-static debootstrap zerofree zip dosfstools \
-        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file kmod bc\
-        binfmt-support ca-certificates \
+        bsdtar libcap2-bin rsync grep udev xz-utils curl xxd file kmod bc \
+        binfmt-support ca-certificates golang \
     && rm -rf /var/lib/apt/lists/*
 
 COPY . /pi-gen/

LICENSE

@@ -1,5 +1,5 @@
 Copyright (c) 2015 Raspberry Pi (Trading) Ltd.
-
+Copyright (c) 2020 Logan Gartner
 All rights reserved.
 
 Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

README.md

@@ -45,14 +45,15 @@ TODO
 
 ### OctoPrint Setup
 - If the GUI is enabled, you can setup OctoPrint on the Raspberry Pi. You can also setup OctoPrint by opening up a web browser on another computer and navigating to `https://RPI-IP`, replacing RPI-IP with the IP address of your Raspberry Pi.
-- If MJPG-Streamer is enabled, you can put `/webcam/?action=stream` into the Stream URL box to enable it in OctoPrint.
+- If MJPG-Streamer is enabled, you can put `/webcam` into the Stream URL box to enable it in OctoPrint.
 
 ### Accessing OctoPrint
 - If OctoPrint is enabled, you can access it at `https://RPI-IP`, replacing RPI-IP with the IP address of your Raspberry Pi.
 
 ### Reporting Bugs
-Please report any bugs by [filing an issue](/issues). Please include as much detail as you can, including:
+Please report any bugs by [filing an issue](/issues). Please include as much detail as you can, including (but not limited to):
 - Raspberry Pi Model
+- Version of TouchPrint
 - What you were doing when the bug occured
 - Steps to reproduce
 - Logs

TODO.md

@@ -4,12 +4,14 @@
 - Add network configuration (replace nmtui)
 - Add hostname configuration (replace nmtui)
 
+## Nginx
+- Add HTTP basic auth (especially to MJPG)
+
 ## Misc
 - More security
+- Wiki
 
 ## Things to consider
 - Wayland using labwc/waybox
 - Python 3
 - Detect if frontend did not load correctly (probably not easy)
-- HTTP/Port 80 redirect
-- https://github.com/blueimp/mjpeg-server 

build.sh

@@ -177,7 +177,7 @@ export LOCALE_DEFAULT="${LOCALE_DEFAULT:-en_US.UTF-8}"
 export KEYBOARD_KEYMAP="${KEYBOARD_KEYMAP:-us}"
 export KEYBOARD_LAYOUT="${KEYBOARD_LAYOUT:-English (US)}"
 
-export TIMEZONE_DEFAULT="${TIMEZONE_DEFAULT:-America/New_York}"
+export TIMEZONE_DEFAULT="${TIMEZONE_DEFAULT:-UTC}"
 
 export GIT_HASH=${GIT_HASH:-"$(git rev-parse HEAD)"}
 

stage1/01-sys-tweaks/00-run.sh

@@ -9,6 +9,7 @@ install -m 644 files/.dialogrc "${ROOTFS_DIR}/etc/skel/.dialogrc"
 install -m 644 files/.dialogrc "${ROOTFS_DIR}/root/.dialogrc"
 mkdir -p "${ROOTFS_DIR}/etc/skel/.config/openbox"
 install -m 644 files/autostart "${ROOTFS_DIR}/etc/skel/.config/openbox/autostart"
+install -m 644 files/menu.xml "${ROOTFS_DIR}/etc/skel/.config/openbox/menu.xml"
 
 on_chroot << EOF
 if ! id -u ${FIRST_USER_NAME} >/dev/null 2>&1; then
@@ -17,7 +18,10 @@ fi
 if ! id -u octoprint >/dev/null 2>&1; then
   adduser --system --shell /usr/sbin/nologin --group --disabled-password --gecos "" octoprint
 fi
+if ! id -u kiosk >/dev/null 2>&1; then
+	adduser --disabled-password --shell /usr/sbin/nologin --gecos "" kiosk 
+fi
 echo "${FIRST_USER_NAME}:${FIRST_USER_PASS}" | chpasswd
-echo "octoprint:$(cat /dev/urandom | tr -dc _A-Z-a-z-0-9 | head -c40)" | chpasswd 
+echo "kiosk:$(cat /dev/urandom | tr -dc _A-Z-a-z-0-9 | head -c40)" | chpasswd 
 echo "root:$(cat /dev/urandom | tr -dc _A-Z-a-z-0-9 | head -c40)" | chpasswd
 EOF

stage1/01-sys-tweaks/files/.browser.sh

@@ -1,25 +1,25 @@
 #!/bin/bash
 
 # Grabs the port (and IP) out of the nginx config
-LISTEN=$(grep -i listen /etc/nginx/listen.conf | awk '{gsub(";",""); print $2}')
+LISTEN=$(awk '/listen/{gsub(";",""); print $2}' /etc/nginx/listen.conf)
 
 # If the value we just grabbed doesn't contain an IP, prepend localhost
 if ! echo $LISTEN | grep ":" 2>&1; then
-  ADDRESS="localhost:$LISTEN"
+  ADDRESS="https://localhost:$LISTEN"
 else
-  ADDRESS=$LISTEN
+  ADDRESS="https://$LISTEN"
 fi
 
 # Override the automatically detected address if the user wants to
 if [[ -f ~/.overrideurl.sh ]]; then source ~/.overrideurl.sh; fi
 
 # Wait until Nginx/override comes up
-while ! curl "$ADDRESS" 2>&1 >/dev/null; do
+while ! curl -f -k -s -I "$ADDRESS" 2>&1 >/dev/null; do
   sleep 1
 done
 
 # Wait until OctoPrint comes up if it is enabled
-while [[ -f /etc/systemd/system/multi-user.target.wants/octoprint.service ]] && ! curl "localhost:5000"; do
+while [[ -f /etc/systemd/system/multi-user.target.wants/octoprint.service ]] && ! curl -f -s -I "localhost:5000"; do
   sleep 1
 done
 
@@ -31,4 +31,4 @@ done
 # -K | Enable kiosk mode (doesn't seem to do anything?)
 # -n | Disable web inspector
 # -p | Disable plugins
-surf -t -F -g -K -n -p "https://$ADDRESS"
+surf -t -F -g -K -n -p "$ADDRESS"

stage1/01-sys-tweaks/files/menu.xml

@@ -0,0 +1,18 @@
+<?xml version="1.0" encoding="UTF-8"?>
+
+<openbox_menu xmlns="http://openbox.org/"
+        xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
+        xsi:schemaLocation="http://openbox.org/
+                file:///usr/share/openbox/menu.xsd">
+
+<menu id="root-menu" label="Openbox 3">
+  <item label="Restart Browser">
+    <action name="Execute"><execute>bash ~/.browser.sh</execute></action>
+  </item>
+  <separator />
+  <item label="Restart GUI">
+    <action name="Exit" />
+  </item>
+</menu>
+
+</openbox_menu> 

stage2/01-sys-tweaks/01-run.sh

@@ -46,6 +46,9 @@ done
 for GRP in dialout plugdev video users; do
   adduser octoprint \$GRP
 done
+for GRP in users; do
+  adduser kiosk \$GRP
+done
 EOF
 
 on_chroot << EOF

stage2/04-octoprint/files/nginx.conf

@@ -20,7 +20,7 @@
         }
     
         upstream "mjpg-streamer" {
-            server 127.0.0.1:8080;
+            server 127.0.0.1:9000;
         }
 
         server {

stage2/05-mjpgstreamer/01-run.sh

@@ -2,24 +2,12 @@
 
 install -m 644 files/mjpg-streamer.service ${ROOTFS_DIR}/etc/systemd/system/mjpg-streamer.service
 install -m 755 files/start-mjpg ${ROOTFS_DIR}/usr/local/bin/start-mjpg
+mkdir -p ${ROOTFS_DIR}/usr/local/etc/mjpg-server/
+install -m 755 files/config.sh ${ROOTFS_DIR}/usr/local/etc/mjpg-server/  
 
-on_chroot << EOF
-# If mjpg is already installed, skip this (for debugging)
-if ! which mjpg_streamer; then
-  cd /tmp
-  # Making sure that this directory doesn't exist
-  rm -rf /tmp/mjpg-streamer
-  git clone https://github.com/jacksonliam/mjpg-streamer/
-  cd mjpg-streamer/mjpg-streamer-experimental/
-  make
-  make install
-  cd /
-  # Cleanup
-  rm -rf /tmp/mjpg-streamer
-  # Create needed folder
-  mkdir -p /var/www/mjpg
-  # Permissions
-  chown octoprint:octoprint /var/www/mjpg
+if [[ ! -f ${ROOTFS_DIR}/usr/local/bin/mjpeg-server ]]; then
+  # Do some semi janky cross compilation since Golang won't let me set GOBIN when cross compiling (gogl plz fix)
+  GOPATH=/tmp/go GOARCH=arm64 go get github.com/blueimp/mjpeg-server
+  cp /tmp/go/bin/linux_arm64/mjpeg-server ${ROOTFS_DIR}/usr/local/bin/mjpeg-server
+  rm -rf /tmp/go
 fi
-EOF
- 

stage2/05-mjpgstreamer/files/config.sh

@@ -0,0 +1,3 @@
+VIDEO_DEVICE="/dev/video0"
+VIDEO_SIZE="1280x720"
+FRAMERATE=15

stage2/05-mjpgstreamer/files/start-mjpg

@@ -1,2 +1,15 @@
 #!/bin/bash
-/usr/local/bin/mjpg_streamer -i input_uvc.so -o "output_http.so --port 8080 -w /var/www/mjpg" 
+
+# Include environment variables
+source /usr/local/etc/mjpg-server/config.sh
+
+# Test if camera can just give us MJPG frames so that we can save a bunch of CPU
+if ffmpeg -input_format mjpeg -video_size $VIDEO_SIZE -framerate $FRAMERATE -nostats -v quiet -i $VIDEO_DEVICE vframes 1 -f null - >/dev/null; then
+  /usr/local/bin/mjpeg-server -a 127.0.0.1:9000 -- ffmpeg -input_format mjpeg -video_size $VIDEO_SIZE -framerate $FRAMERATE -i $VIDEO_DEVICE -f mjpeg -c:v copy - 
+# Oh, it can't :( Guess I'll just blast the CPU to maybe get 5FPS
+elif ffmpeg -video_size $VIDEO_SIZE -framerate $FRAMERATE -nostats -v quiet -i $VIDEO_DEVICE -vframes 1 -f null - >/dev/null; then  
+  /usr/local/bin/mjpeg-server -a 127.0.0.1:9000 -- ffmpeg -video_size $VIDEO_SIZE -framerate $FRAMERATE -i /dev/video0 -f mjpeg -
+else
+  echo "FFmpeg could not start. Double check your configuration."
+  exit 1
+fi

stage2/06-utils/files/first-time.sh

@@ -64,10 +64,13 @@ suggested_menu () {
   done
 }
 
-dialog --title "NOTICE" --nocancel --colors --msgbox "This collection of software is currently in alpha. It is lacking several critical features. \Zb\Z1DO NOT\Zn use this in a production environment. This image has been provided for testing purposes only." 10 50
+dialog --title "NOTICE" --nocancel --colors --msgbox "This collection of software is currently in beta. It is lacking several critical features. \Zb\Z1DO NOT\Zn use this in a production environment." 10 50
 
 # Force the user to change the pi user's password before the RPi gets botnetted
 change_password
+# Randomize the root and frontend password
+echo "kiosk:$(cat /dev/urandom | tr -dc _A-Z-a-z-0-9 | head -c40)" | chpasswd 
+echo "root:$(cat /dev/urandom | tr -dc _A-Z-a-z-0-9 | head -c40)" | chpasswd
 
 dialog --title "Network Configuration" --nocancel --msgbox "Setup will now open nmtui, a program to help configure your ethernet/wireless interfaces. Hit Quit when you are done." 10 50
 nmtui
@@ -76,10 +79,14 @@ nmtui
 dpkg-reconfigure tzdata
 
 # Enable/disable OctoPrint, GUI, MJPG and SSH
-service_select 
+service_toggle 
 
 screen_timeout
 
+if ( udevadm info --export-db | grep ID_INPUT_TOUCHSCREEN=1 >/dev/null ) && dialog --title "Touchscreen Calibration" --defaultno --yesno "Do you wish to calibrate your touchscreen?\nMost touchscreens are calibrated out of the factory, so this is usually not needed." 10 60; then
+  startx $(which xinput_calibrator) --no-timeout --output-filename /etc/X11/xorg.conf.d/99-calibration.conf 
+fi 
+
 # Makes a certificate and key for Nginx HTTPS
 openssl req -x509 -nodes -days 36500 -newkey rsa:4096 -subj "/C=/ST=/L=/O=/OU=/CN=*/emailAddress=" -out /etc/ssl/certs/nginx-octoprint.crt -keyout /etc/ssl/private/nginx-octoprint.key
 
@@ -90,6 +97,7 @@ fi
 
 # If MJPG service is enabled, ask user which video device to use
 if [[ -f /etc/systemd/system/multi-user.target.wants/mjpg-streamer.service ]]; then
+  video_select
   video_config
 fi
 

stage2/06-utils/files/octo-config

@@ -9,23 +9,74 @@ fi
 source /usr/local/lib/octo-lib.sh
 
 main_menu () {
-  local MAINMENU=$(dialog --nocancel --title "Pi Setup" --menu "" 10 50 0 \
+  local MAINMENU=$(dialog --nocancel --title "TouchPrint Setup" --menu "" 10 50 0 \
      "1" "Configure networking" \
      "2" "Change password for pi" \
      "3" "Configure services" \
      "4" "Configure screen timeout" \
-     "5" "Configure Nginx" \
-     "6" "Configure MJPG" \
-     "7" "Exit" 3>&1 1>&2 2>&3)
+     "5" "Calibrate touchscreen" \
+     "6" "Exit" 3>&1 1>&2 2>&3)
 
   case $MAINMENU in
     "1") nmtui; main_menu; return 0;;
     "2") change_password; main_menu; return 0;;
-    "3") service_select; main_menu; return 0;;
+    "3") services_menu; main_menu; return 0;;
     "4") screen_timeout; main_menu; return 0;;
-    "5") nginx_config; main_menu; return 0;;
-    "6") video_config; main_menu; return 0;;
-    "7") return 0;;
+    "5") dialog --title "Touchscreen Calibration" --infobox "Waiting for touchscreen calibrator to close..." 3 50; DISPLAY=:0 xinput_calibrator --no-timeout --output-filename /etc/X11/xorg.conf.d/99-calibration.conf; main_menu; return 0;;
+    "6") return 0;;
+  esac 
+}
+
+services_menu () {
+  local SERVICESMENU=$(dialog --nocancel --title "Services Select" --menu "" 10 50 0 \
+     "1" "Enable/disable services" \
+     "2" "Service health check" \
+     "3" "Configure Nginx" \
+     "4" "Configure MJPG" \
+     "5" "Go Back" 3>&1 1>&2 2>&3) 
+
+  case $SERVICESMENU in
+    "1") service_toggle; services_menu; return 0;;
+    "2") service_health; services_menu; return 0;;
+    "3") nginx_config; services_menu; return 0;;
+    "4") video_menu; services_menu; return 0;;
+    "5") return 0;;
+  esac 
+}
+
+service_health () {
+  # Grab listening address/port from Nginx config
+  if [[ -f /etc/nginx/listen.conf ]]; then
+    LISTEN=$(awk '/listen/{gsub(";",""); print $2}' /etc/nginx/listen.conf)
+  else
+    LISTEN="443"
+  fi
+  
+  # If Nginx config didn't contain a port, assume localhost
+  if ! echo $LISTEN | grep ":" 2>&1; then
+    ADDRESS="localhost:$LISTEN"
+  else
+    ADDRESS=$LISTEN
+  fi
+
+  # I hate bash, and soon you will too
+  dialog --colors --title "Service Health" --msgbox "\
+\ZnOctoPrint: \Zb$(if curl -s -I 127.0.0.1:5000 >/dev/null; then echo '\Z2Online'; elif [[ ! -f /etc/systemd/system/multi-user.target.wants/octoprint.service ]]; then echo "Disabled"; else echo '\Z1Offline'; fi)
+\ZnMJPG:      \Zb$(if curl -s -I 127.0.0.1:9000 >/dev/null; then echo '\Z2Online'; elif [[ ! -f /etc/systemd/system/multi-user.target.wants/mjpg-streamer.service ]]; then echo "Disabled"; else echo '\Z1Offline'; fi)
+\ZnNginx:     \Zb$(if curl -k -s -I https://$ADDRESS >/dev/null; then echo '\Z2Online'; elif [[ ! -f /etc/systemd/system/multi-user.target.wants/nginx.service ]]; then echo "Disabled"; else echo '\Z1Offline'; fi)
+\ZnSSH:       \Zb$(if pgrep sshd >/dev/null; then echo '\Z2Online'; elif [[ ! -f /etc/systemd/system/multi-user.target.wants/sshd.service ]]; then echo "Disabled"; else echo '\Z1Offline'; fi)" 0 0
+}
+
+video_menu () {
+  local VIDEOMENU=$(dialog --title "MJPG Config" --menu "" 10 50 0 \
+    "1" "Camera Selection" \
+    "2" "Video Settings" \
+    "3" "Go Back" 3>&1 1>&2 2>&3)
+
+  case $VIDEOMENU in
+    "1") video_select; video_menu; return 0;;
+    "2") video_config; video_menu; return 0;;
+    "3") return 0;;
   esac
 } 
 

stage2/06-utils/files/octo-lib.sh

@@ -19,7 +19,7 @@ change_password () {
   unset PASSWORD
 }
 
-service_select () {
+service_toggle () {
   # Toggle the checkboxes if the service is active or not
   local SERVICE_MENU=$(dialog --separate-output --nocancel --title "Select services" --checklist "Enable/disable services" 0 0 0 \
     "1" "OctoPrint" $(if [[ -f /etc/systemd/system/multi-user.target.wants/octoprint.service ]]; then echo "ON"; else echo "OFF"; fi) \
@@ -69,7 +69,6 @@ service_select () {
     systemctl disable ssh
   fi
 
-
 << 'EOF'
   for ((i = 0; i <= 3; i++)); do
     for n in "${SERVICE_MENU[@]}"; do
@@ -91,9 +90,12 @@ service_select () {
 EOF
 }
 
-screen_timeout() {
+screen_timeout () {
   local TIMEOUT=$(dialog --nocancel --title "Screen Timeout" --inputbox "Input your desired screen timeout in seconds.\nEnter \"off\" to disable the screen timeout.\n\nAdding a screen timeout can reduce screen burn in.\n\nDefault: off" 12 60 "off" 3>&1 1>&2 2>&3) 
-  cat > /home/pi/.xtimeout << EOF
+  
+  [[ "$TIMEOUT" == "" ]] && return 0
+
+  cat > /home/kiosk/.xtimeout << EOF
     xset s ${TIMEOUT}
     xset -dpms 
 EOF
@@ -104,24 +106,29 @@ nginx_config () {
   
   # Grab the variable from the nginx conf if it exists, otherwise use default
   if [[ -f /etc/nginx/listen.conf ]]; then
-    LISTEN=$(grep -i listen /etc/nginx/listen.conf | awk '{gsub(";",""); print $2}')
+    LISTEN=$(awk '/listen/{gsub(";",""); print $2}' /etc/nginx/listen.conf) 
   else
     LISTEN="443"
   fi
   
   LISTEN=$(dialog --title "Nginx Config" --nocancel --inputbox "Configure what port and IP Nginx should listen on.\nTo listen on all IPs, just enter the port.\nDefault: 443" 11 50 "$LISTEN" 3>&1 1>&2 2>&3)
 
+  [[ "$LISTEN" == "" ]] && return 0
+
   # Write new value to nginx
   echo "listen $LISTEN;" > /etc/nginx/listen.conf
 }
   
-video_config () {
+video_select () {
   # In the unlikely event that there are no video devices, don't continue
   if ! ls /dev/video* 2>&1 >/dev/null; then
     dialog --title "Error" --msgbox "No video devices detected!" 10 50
     return 1
   fi
 
+  # Grab config values
+  source /usr/local/etc/mjpg-server/config.sh 
+
   # Grab all video devices
   local DEVICES=($(ls /dev/video*))
   
@@ -129,13 +136,41 @@ video_config () {
 
   # Generate a menu from said video devices
   for ((i = 0; i < ${#DEVICES[@]}; i++)); do
-    DEVICELIST+="${DEVICES[$i]} $i OFF "
+    if [[ "$VIDEO_DEVICE" == ${DEVICES[$i]} ]]; then
+      DEVICELIST+="${DEVICES[$i]} $i ON "
+    else
+      DEVICELIST+="${DEVICES[$i]} $i OFF "
+    fi
   done
 
-  local DEVICE_MENU=$(dialog --title "Video Config" --nocancel --radiolist "Choose which video device you wish to use for MJPG-Streamer" 10 50 0 $DEVICELIST 3>&1 1>&2 2>&3)
+  local DEVICE_MENU=$(dialog --title "MJPG Config" --nocancel --radiolist "Choose which video device you wish to use for MJPG-Streamer" 10 50 0 $DEVICELIST 3>&1 1>&2 2>&3)
   
   [[ "$DEVICE_MENU" == "" ]] && return 0
  
-  # Write selected value to startup script
-  echo -e '#!/bin/bash'"\n/usr/local/bin/mjpg_streamer -i \"input_uvc.so -d $DEVICE_MENU\" -o \"output_http.so --port 8080\"" > /usr/local/bin/start-mjpg
+  # Write selected value to config file 
+  echo -e "VIDEO_DEVICE=$DEVICE_MENU\nVIDEO_SIZE=$VIDEO_SIZE\nFRAMERATE=$FRAMERATE" > /usr/local/etc/mjpg-server/config.sh 
+}
+
+video_config () {
+  # Include config values
+  source /usr/local/etc/mjpg-server/config.sh
+
+  # Set video device to a resonable default if it isn't set for some reason
+  if [[ "$VIDEO_DEVICE" == "" ]]; then
+    VIDEO_DEVICE="/dev/video0"
+  fi  
+
+  local VIDEOCONFIG_MENU=$(dialog --nocancel --title "MJPG Config" --form "Choose desired camera resolution and framerate." 10 50 0\
+    "Resolution: " 1 1 "$VIDEO_SIZE" 1 13 10 0 \
+    "Framerate: " 2 1 "$FRAMERATE" 2 12 3 0 3>&1 1>&2 2>&3)
+  VIDEOCONFIG_MENU=($VIDEOCONFIG_MENU)
+
+  if [[ "$VIDEOCONFIG_MENU[0]" == "" ]] || [[ "$VIDEOCONFIG_MENU[1]" == "" ]]; then
+    dialog --title "Error" --msgbox "Invalid input!" 10 50
+    video_config
+    return 0
+  fi
+
+  # Write values to config file 
+  echo -e "VIDEO_DEVICE=$VIDEO_DEVICE\nVIDEO_SIZE=${VIDEOCONFIG_MENU[0]}\nFRAMERATE=${VIDEOCONFIG_MENU[1]}" > /usr/local/etc/mjpg-server/config.sh 
 }

stage3/00-install-packages/01-run.sh

@@ -1,41 +1,7 @@
 #!/bin/bash -e
 
-#echo -n -e "NODM_USER=${FIRST_USER_NAME}\nNODM_XSESSION=/home/${FIRST_USER_NAME}/.xprofile" > ${ROOTFS_DIR}/etc/nodm.conf
-
-cat > ${ROOTFS_DIR}/etc/default/nodm << EOF
-# nodm configuration
-
-# Set NODM_ENABLED to something different than 'false' to enable nodm
-NODM_ENABLED=true
-
-# User to autologin for
-NODM_USER=${FIRST_USER_NAME}
-
-# First vt to try when looking for free VTs
-NODM_FIRST_VT=7
-
-# X session
-NODM_XSESSION=/home/${FIRST_USER_NAME}/.xprofile
-
-# Options for nodm itself
-NODM_OPTIONS=
-
-# Options for the X server.
-#
-# Format: [/usr/bin/<Xserver>] [:<disp>] <Xserver-options>
-#
-# The Xserver executable and the display name can be omitted, but should
-# be placed in front, if nodm's defaults shall be overridden.
-NODM_X_OPTIONS='-nolisten tcp'
-
-# If an X session will run for less than this time in seconds, nodm will wait an
-# increasing bit of time before restarting the session.
-NODM_MIN_SESSION_TIME=60
-
-# Timeout (in seconds) to wait for X to be ready to accept connections. If X is
-# not ready before this timeout, it is killed and restarted.
-NODM_X_TIMEOUT=300
-EOF 
+mkdir -p ${ROOTFS_DIR}/etc/default
+install -m 644 files/nodm ${ROOTFS_DIR}/etc/default/nodm
 
 # Probably not needed
 on_chroot << EOF

stage3/00-install-packages/files/nodm

@@ -0,0 +1,33 @@
+# nodm configuration
+
+# Set NODM_ENABLED to something different than 'false' to enable nodm
+NODM_ENABLED=true
+
+# User to autologin for
+NODM_USER=kiosk
+
+# First vt to try when looking for free VTs
+NODM_FIRST_VT=7
+
+# X session
+NODM_XSESSION=/home/kiosk/.xprofile
+
+# Options for nodm itself
+NODM_OPTIONS=
+
+# Options for the X server.
+#
+# Format: [/usr/bin/<Xserver>] [:<disp>] <Xserver-options>
+#
+# The Xserver executable and the display name can be omitted, but should
+# be placed in front, if nodm's defaults shall be overridden.
+NODM_X_OPTIONS='-nolisten tcp'
+
+# If an X session will run for less than this time in seconds, nodm will wait an
+# increasing bit of time before restarting the session.
+NODM_MIN_SESSION_TIME=60
+
+# Timeout (in seconds) to wait for X to be ready to accept connections. If X is
+# not ready before this timeout, it is killed and restarted.
+NODM_X_TIMEOUT=300
+