# LED Driver

A simple PCB I made to drive a LED (strip) using an AL8843.

This board features a High/Low brightness pull-down, as well as an On/Off pull-down.

The board by default is configured to a max brightness current of 1A. To change this, swap R9 with an appropriate resistor using the formula `Amps=0.1/R9`.
The board is designed to handle up to 2A of current continuously.

## License
This repository is licensed under the [CC BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/).