# OpenComputers configuration. This file uses typesafe config's HOCON syntax. # Try setting your syntax highlighting to Ruby, to help readability. At least # in Sublime Text that works really well. Note that this file is overwritten # whenever you start the game! Changes to the comments may vanish. # Note that all mentions of 'KB' or 'kilobyte' mean 1024 bytes. opencomputers { # Chunkloader Upgrade settings. chunkloader { # This is a list of blacklisted dimensions. Chunkloaders may only be activated # in dimensions that aren't present in this list. dimBlacklist=[] # This is a list of whitelisted dimensions. Chunkloaders may only be activated # in dimensions that are present in this list. If this list is empty, # chunkloaders may be activated to all dimensions not blacklisted. Note that the # blacklist is always applied, so if an entry is present in both the # whitelist and the blacklist, the blacklist will win. dimWhitelist=[] } # Client side settings, presentation and performance related stuff. client { # The radius in which computer beeps can be heard. beepRadius=16 # The sample rate used for generating beeps of computers' internal # speakers. Use custom values at your own responsibility here; if it # breaks OC you'll get no support. Some potentially reasonable # lower values are 16000 or even 8000 (which was the old default, but # leads to artifacting on certain frequencies). beepSampleRate=44100 # The base volume of beeps generated by computers. This may be in a # range of [0, 127], where 0 means mute (the sound will not even be # generated), and 127 means maximum amplitude / volume. beepVolume=32 # Whether to emit particle effects around players via nanomachines. This # includes the basic particles giving a rough indication of the current # power level of the nanomachines as well as particles emitted by the # particle effect behaviors. enableNanomachinePfx=true # This is the scaling of the individual chars rendered on screens. This # is set to slightly overscale per default, to avoid gaps between fully # filled chars to appear (i.e. the block symbol that is used for cursor # blinking for example) on less accurate hardware. fontCharScale=1.01 # Which font renderer to use. Defaults to `hexfont` if invalid. # Possible values: # - hexfont: the (since 1.3.2) default font renderer. Font in .hex format # capable of rendering many unicode glyphs. # The used font data can be swapped out using resource packs, # but is harder to work with, since it involves binary data. # - texture: the old, font-texture based font renderer that was used # in OC versions prior to 1.3.2. This will allow overriding # the font texture as before. Keep in mind that this renderer # is slightly less efficient than the new one, and more # importantly, can only render code page 437 (as opposed to... # a *lot* of unicode). fontRenderer=hexfont # The distance at which to start fading out the hologram (as with # hologramRenderDistance). This is purely cosmetic, to avoid image # disappearing instantly when moving too far away from a projector. # It does not affect performance. Holograms are transparent anyway. hologramFadeStartDistance=48 # This controls how often holograms 'flicker'. This is the chance that it # flickers for *each frame*, meaning if you're running at high FPS you # may want to lower this a bit, to avoid it flickering too much. hologramFlickerFrequency=0.025 # The maximum render distance of a hologram projected by a highest tier # hologram projector when at maximum scale. Render distance is scaled # down with the actual scale of the hologram. hologramRenderDistance=64 # The maximum distance at which to render text on screens. Rendering text # can be pretty expensive, so if you have a lot of screens you'll want to # avoid huge numbers here. Note that this setting is client-sided, and # only has an impact on render performance on clients. maxScreenTextRenderDistance=20 # The color of monochrome text (i.e. displayed when in 1-bit color depth, # e.g. tier one screens / GPUs, or higher tier set to 1-bit color depth). # Defaults to white, feel free to make it some other color, tho! monochromeColor="0xFFFFFF" # Position of the power indicator for nanomachines, by default left to the # player's health, specified by negative values. Values in [0, 1) will be # treated as relative positions, values in [1, inf) will be treated as # absolute positions. nanomachineHudPos=[ -1, -1 ] # Render robots' names as a label above them when near them robotLabels=true # The distance at which to start fading out the text on screens. This is # purely cosmetic, to avoid text disappearing instantly when moving too # far away from a screen. This should have no measurable impact on # performance. Note that this needs OpenGL 1.4 to work, otherwise text # will always just instantly disappear when moving away from the screen # displaying it. screenTextFadeStartDistance=15 # The volume multiplier applied to sounds from this mod like the computer # running noise. Disable sounds by setting this to zero. soundVolume=1 # If you prefer the text on the screens to be aliased (you know, *not* # anti-aliased / smoothed) turn this option off. textAntiAlias=true # Whether to apply linear filtering for text displayed on screens when the # screen has to be scaled down - i.e. the text is rendered at a resolution # lower than their native one, e.g. when the GUI scale is less than one or # when looking at a far away screen. This leads to smoother text for # scaled down text but results in characters not perfectly connecting # anymore (for example for box drawing characters. Look it up on # Wikipedia.) textLinearFiltering=false } # Computer related settings, concerns server performance and security. computer { # The provided call budgets by the three tiers of CPU and memory. Higher # budgets mean that more direct calls can be performed per tick. You can # raise this to increase the "speed" of computers at the cost of higher # real CPU time. Lower this to lower the load Lua executors put on your # machine / server, at the cost of slower computers. This list must # contain exactly three entries, or it will be ignored. callBudgets=[ 0.5, 1, 1.5 ] # This determines whether computers can only be used by players that are # registered as users on them. Per default a newly placed computer has no # users. Whenever there are no users the computer is free for all. Users # can be managed via the Lua API (computer.addUser, computer.removeUser, # computer.users). If this is true, the following interactions are only # possible for users: # - input via the keyboard and touch screen. # - inventory management. # - breaking the computer block. # If this is set to false, all computers will always be usable by all # players, no matter the contents of the user list. Note that operators # are treated as if they were in the user list of every computer, i.e. no # restrictions apply to them. # See also: `maxUsers` and `maxUsernameLength`. canComputersBeOwned=true # The number of components the different CPU tiers support. This list # must contain exactly four entries, or it will be ignored. cpuComponentCount=[ 8, 12, 16, 1024 ] # The maximum size of the byte array that can be stored on EEPROMs as configuration data. eepromDataSize=256 # The maximum size of the byte array that can be stored on EEPROMs as executable data.. eepromSize=4096 # Whether to delete all contents in the /tmp file system when performing # a 'soft' reboot (i.e. via `computer.shutdown(true)`). The tmpfs will # always be erased when the computer is completely powered off, even if # it crashed. This setting is purely for software-triggered reboots. eraseTmpOnReboot=false # The time in milliseconds that scheduled computers are forced to wait # before executing more code. This avoids computers to "busy idle", # leading to artificially high CPU load. If you're worried about # performance on your server, increase this number a little (it should # never exceed 50, a single tick, though) to reduce CPU load even more. executionDelay=12 # Settings specific to the Lua architecture. lua { # Whether to allow loading precompiled bytecode via Lua's `load` # function, or related functions (`loadfile`, `dofile`). Enable this # only if you absolutely trust all users on your server and all Lua # code you run. This can be a MASSIVE SECURITY RISK, since precompiled # code can easily be used for exploits, running arbitrary code on the # real server! I cannot stress this enough: only enable this is you # know what you're doing. allowBytecode=false # Whether to allow user defined __gc callbacks, i.e. __gc callbacks # defined *inside* the sandbox. Since garbage collection callbacks # are not sandboxed (hooks are disabled while they run), this is not # recommended. allowGC=false # Whether to make the Lua 5.3 architecture the default architecture. # If enabled, a crafted CPU will first be the Lua 5.3 architecture. defaultLua53=true # Whether to make the Lua 5.3 architecture available. If enabled, you # can reconfigure any CPU to use the Lua 5.3 architecture. enableLua53=true # The total maximum amount of memory a Lua machine may use for user # programs. The total amount made available by components cannot # exceed this. The default is 64*1024*1024. Keep in mind that this does # not include memory reserved for built-in code such as `machine.lua`. # IMPORTANT: DO NOT MESS WITH THIS UNLESS YOU KNOW WHAT YOU'RE DOING. # IN PARTICULAR, DO NOT REPORT ISSUES AFTER MESSING WITH THIS! maxTotalRam=67108864 # This setting allows you to fine-tune how RAM sizes are scaled internally # on 64 Bit machines (i.e. when the Minecraft server runs in a 64 Bit VM). # Why is this even necessary? Because objects consume more memory in a 64 # Bit environment than in a 32 Bit one, due to pointers and possibly some # integer types being twice as large. It's actually impossible to break # this down to a single number, so this is really just a rough guess. If # you notice this doesn't match what some Lua program would use on 32 bit, # feel free to play with this and report your findings! # Note that the values *displayed* to Lua via `computer.totalMemory` and # `computer.freeMemory` will be scaled by the inverse, so that they always # correspond to the "apparent" sizes of the installed memory modules. For # example, when running a computer with a 64KB RAM module, even if it's # scaled up to 96KB, `computer.totalMemory` will return 64KB, and if there # are really 45KB free, `computer.freeMemory` will return 32KB. ramScaleFor64Bit=1.8 # The sizes of the six levels of RAM, in kilobytes. This list must # contain exactly six entries, or it will be ignored. Note that while # there are six levels of RAM, they still fall into the three tiers of # items (level 1, 2 = tier 1, level 3, 4 = tier 2, level 5, 6 = tier 3). ramSizes=[ 192, 256, 384, 512, 768, 1024 ] } # The maximum depth a machine will queue signals before dropping them # A machine state should be pulling signals via computer.pullSignal # As the machine receives signals they are queued for pulling, and # this maximum defines the max queue size. All signals recieved when # the queue is full are discarded. Note that clipboard text creates # a signal for each line of text. Thus client are limited to pasting # text of this many lines. The default (and minimum) is 256 maxSignalQueueSize=256 # Sanity check for username length for users registered with computers. We # store the actual user names instead of a hash to allow iterating the # list of registered users on the Lua side. # See also: `canComputersBeOwned`. maxUsernameLength=32 # The maximum number of users that can be registered with a single # computer. This is used to avoid computers allocating unchecked amounts # of memory by registering an unlimited number of users. See also: # `canComputersBeOwned`. maxUsers=16 # The time in seconds to wait after a computer has been restored before it # continues to run. This is meant to allow the world around the computer # to settle, avoiding issues such as components in neighboring chunks # being removed and then re-connected and other odd things that might # happen. startupDelay=0.25 # The overall number of threads to use to drive computers. Whenever a # computer should run, for example because a signal should be processed or # some sleep timer expired it is queued for execution by a worker thread. # The higher the number of worker threads, the less likely it will be that # computers block each other from running, but the higher the host # system's load may become. threads=4 # The time in seconds a program may run without yielding before it is # forcibly aborted. This is used to avoid stupidly written or malicious # programs blocking other computers by locking down the executor threads. # Note that changing this won't have any effect on computers that are # already running - they'll have to be rebooted for this to take effect. timeout=5 } # Settings that are intended for debugging issues, not for normal use. # You usually don't want to touch these unless asked to do so by a developer. debug { # On some platforms the native library can crash the game, so there are # a few checks in place to avoid trying to load it in those cases. This # is Windows XP and Windows Server 2003, right. If you think it might # work nonetheless (newer builds of Server2k3 e.g.) you might want to # try setting this to `true`. Use this at your own risk. If the game # crashes as a result of setting this to `true` DO NOT REPORT IT. alwaysTryNative=false # Enable debug card functionality. This may also be of use for custom # maps, so it is enabled by default. If you run a server where people # may cheat in items but should not have op/admin-like rights, you may # want to set this to false or `deny`. Set this to `whitelist` if you # want to enable whitelisting of debug card users (managed by command # /oc_debugWhitelist). This will *not* remove the card, it will just # make all functions it provides error out. debugCardAccess=allow # Prevent OC calling Lua's os.setlocale method to ensure number # formatting is the same on all systems it is run on. Use this if you # suspect this might mess with some other part of Java (this affects # the native C locale). disableLocaleChanging=false # Disable memory limit enforcement. This means Lua states can # theoretically use as much memory as they want. Only relevant when # using the native library. disableMemoryLimit=false # Disable computer state persistence. This means that computers will # automatically be rebooted when loaded after being unloaded, instead # of resuming with their exection (it also means the state is not even # saved). Only relevant when using the native library. disablePersistence=false # Disable user data support. This means any otherwise supported # userdata (implementing the Value interface) will not be pushed # to the Lua state. disableUserdata=false # Force the buffered file system to be case insensitive. This makes it # impossible to have multiple files whose names only differ in their # capitalization, which is commonly the case on Windows, for example. # This only takes effect when bufferChanges is set to true. forceCaseInsensitiveFS=false # Forces the use of the LuaJ fallback instead of the native libraries. # Use this if you have concerns using native libraries or experience # issues with the native library. forceLuaJ=false # Force loading one specific library, to avoid trying to load any # others. Use this if you get warnings in the log or are told to do # so for debugging purposes ;-) forceNativeLibWithName="" # Pass along IDs of items and fluids when converting them to a table # representation for Lua. insertIdsInConverters=false # This setting is meant for debugging errors that occur in Lua callbacks. # Per default, if an error occurs and it has a message set, only the # message is pushed back to Lua, and that's it. If you encounter weird # errors or are developing an addon you'll want the stacktrace for those # errors. Enabling this setting will log them to the game log. This is # disabled per default to avoid spamming the log with inconsequentual # exceptions such as IllegalArgumentExceptions and the like. logCallbackErrors=false # Logs the full error when a native library fails to load. This is # disabled by default to avoid spamming the log, since libraries are # iterated until one works, so it's very likely for some to fail. Use # this in case all libraries fail to load even though you'd expect one # to work. logFullNativeLibLoadErrors=false # Logs information about malformed glyphs (i.e. glyphs that deviate in # width from what wcwidth says). logHexFontErrors=false # Used to suppress log spam for OpenGL errors on derpy drivers. I'm # quite certain the code in the font render is valid, display list # compatible OpenGL, but it seems to cause 'invalid operation' errors # when executed as a display list. I'd be happy to be proven wrong, # since it'd restore some of my trust into AMD drivers... logOpenGLErrors=false # Extract the native library with Lua into the system's temporary # directory instead of the game directory (e.g. /tmp on Linux). The # default is to extract into the game directory, to avoid issues when # the temporary directory is mounted as noexec (meaning the lib cannot # be loaded). There is also less of a chance of conflicts when running # multiple servers or server and client on the same machine. nativeInTmpDir=false # Due to a bug in Minecraft's lighting code there's an issue where # lighting does not properly update near light emitting blocks that are # fully solid - like screens, for example. This can be annoying when # using other blocks that dynamically change their brightness (e.g. for # the addon mod OpenLights). Enable this to force light emitting blocks # in oc to periodically (every two seconds) do an update. This should # not have an overly noticeable impact on performance, but it's disabled # by default because it is unnecessary in *most* cases. periodicallyForceLightUpdate=false # Whether to always register the LuaJ architecture - even if the native # library is available. In that case it is possible to switch between # the two like any other registered architecture. registerLuaJArchitecture=false # This is meant for debugging errors. Enabling this has a high impact # on computers' save and load performance, so you should not enable # this unless you're asked to. verbosePersistenceErrors=false } # File system related settings, performance and and balancing. filesystem { # Whether persistent file systems such as disk drives should be # 'buffered', and only written to disk when the world is saved. This # applies to all hard drives. The advantage of having this enabled is that # data will never go 'out of sync' with the computer's state if the game # crashes. The price is slightly higher memory consumption, since all # loaded files have to be kept in memory (loaded as in when the hard drive # is in a computer). bufferChanges=true # The base 'cost' of a single file or directory on a limited file system, # such as hard drives. When computing the used space we add this cost to # the real size of each file (and folders, which are zero sized # otherwise). This is to ensure that users cannot spam the file system # with an infinite number of files and/or folders. Note that the size # returned via the API will always be the real file size, however. fileCost=512 # The size of writable floppy disks, in kilobytes. floppySize=512 # Number of physical platters to pretend a disk has in unmanaged mode. This # controls seek times, in how it emulates sectors overlapping (thus sharing # a common head position for access). hddPlatterCounts=[ 2, 4, 8 ] # The sizes of the three tiers of hard drives, in kilobytes. This list # must contain exactly three entries, or it will be ignored. hddSizes=[ 1024, 2048, 4096 ] # The maximum number of file handles any single computer may have open at # a time. Note that this is *per filesystem*. Also note that this is only # enforced by the filesystem node - if an add-on decides to be fancy it # may well ignore this. Since file systems are usually 'virtual' this will # usually not have any real impact on performance and won't be noticeable # on the host operating system. maxHandles=16 # The maximum block size that can be read in one 'read' call on a file # system. This is used to limit the amount of memory a call from a user # program can cause to be allocated on the host side: when 'read' is, # called a byte array with the specified size has to be allocated. So if # this weren't limited, a Lua program could trigger massive memory # allocations regardless of the amount of RAM installed in the computer it # runs on. As a side effect this pretty much determines the read # performance of file systems. maxReadBuffer=2048 # When skipping more than this number of sectors in unmanaged mode, the # pause specified in sectorSeekTime will be enforced. We use this instead # of linear scaling for movement because those values would have to be # really small, which is hard to conceptualize and configure. sectorSeekThreshold=128 # The time to pause when the head movement threshold is exceeded. sectorSeekTime=0.1 # The size of the /tmp filesystem that each computer gets for free. If # set to a non-positive value the tmp file system will not be created. tmpSize=64 } hologram { # Whether the hologram block should provide light. It'll also emit light # when off, because having state-based light in MC is... painful. emitLight=true # This controls the maximum scales of holograms, by tier. # The size at scale 1 is 3x2x3 blocks, at scale 3 the hologram will # span up to 9x6x9 blocks. Unlike most other `client' settings, this # value is only used for validation *on the server*, with the effects # only being visible on the client. # Warning: very large values may lead to rendering and/or performance # issues due to the high view distance! Increase at your own peril. maxScale=[ 3, 4 ] # This controls the maximum translation of holograms, by tier. # The scale is in "hologram sizes", i.e. scale 1 allows offsetting a # hologram once by its own size. maxTranslation=[ 0.25, 0.5 ] # The delay forced on computers between calls to `hologram.setRaw`, in # seconds. Lower this if you want faster updates, raise this if you're # worried about bandwidth use; in *normal* use-cases this will never be # an issue. When abused, `setRaw` can be used to generate network traffic # due to changed data being sent to clients. With the default settings, # the *worst case* is ~30KB/s/client. Again, for normal use-cases this # is actually barely noticeable. setRawDelay=0.2 } # Settings for mod integration (the mod previously known as OpenComponents). integration { buildcraft { # Cost to convert a loot disk to another in the BuildCraft programming table. programmingTableCost=5000 } # The name to use for the global fake player needed for some mod # interactions. fakePlayerName="[OpenComputers]" # The UUID to use for the global fake player needed for some mod # interactions. fakePlayerUuid="7e506b5d-2ccb-4ac4-a249-5624925b0c67" # A list of mods (by mod id) for which support should NOT be enabled. Use # this to disable support for mods you feel should not be controllable via # computers (such as magic related mods, which is why Thaumcraft is on this # list by default.) modBlacklist=[ Thaumcraft, thaumicenergistics ] # A list of tile entities by class name that should NOT be accessible via # the Adapter block. Add blocks here that can lead to crashes or deadlocks # (and report them, please!) peripheralBlacklist=[ "net.minecraft.tileentity.TileEntityCommandBlock" ] # Vanilla integration related settings. vanilla { # Whether to allow the item stack converter to push NBT data in # compressed format (GZIP'ed). This can be useful for pushing this # data back to other callbacks. However, given a sophisticated # enough software (Lua script) it is possible to decode this data, # and get access to things that should be considered implementation # detail / private (mods may keep "secret" data in such NBT tags). # The recommended method is to use the database component instead. allowItemStackNBTTags=false # Whether to enable the command block driver. Enabling this allows # computers to set and execute commands via command blocks next to # adapter blocks. The commands are run using OC's general fake player. enableCommandBlockDriver=false # Whether to enable the inventory driver. This driver allows interacting # with inventories adjacent to adapters in a way similar to what the # inventory controller upgrade allows when built into a robot or placed # inside an adapter. It is therefore considered to be somewhat cheaty by # some, and disabled by default. If you don't care about that, feel free # to enable this driver. enableInventoryDriver=false # Whether to enable the tank driver. This driver is like the inventory # driver, just for fluid tanks, and is disabled by default with the same # reasoning as the inventory driver - using a tank controller upgrade in # an adapter has pretty much the same effect. enableTankDriver=false } } # Internet settings, security related. internet { # This is a list of blacklisted domain names. If an HTTP request is made # or a socket connection is opened the target address will be compared # to the addresses / address ranges in this list. It it is present in this # list, the request will be denied. # Entries are either domain names (www.example.com) or IP addresses in # string format (10.0.0.3), optionally in CIDR notation to make it easier # to define address ranges (1.0.0.0/8). Domains are resolved to their # actual IP once on startup, future requests are resolved and compared # to the resolved addresses. # By default all local addresses are blocked. This is only meant as a # thin layer of security, to avoid average users hosting a game on their # local machine having players access services in their local network. # Server hosters are expected to configure their network outside of the # mod's context in an appropriate manner, e.g. using a system firewall. blacklist=[ "127.0.0.0/8", "10.0.0.0/8", "192.168.0.0/16", "172.16.0.0/12" ] # Whether to allow HTTP requests via internet cards. When enabled, # the `request` method on internet card components becomes available. enableHttp=true # Whether to allow adding custom headers to HTTP requests. enableHttpHeaders=true # Whether to allow TCP connections via internet cards. When enabled, # the `connect` method on internet card components becomes available. enableTcp=true # The maximum concurrent TCP connections *each* internet card can have # open at a time. maxTcpConnections=4 # The time in seconds to wait for a response to a request before timing # out and returning an error message. If this is zero (the default) the # request will never time out. requestTimeout=0 # The number of threads used for processing host name lookups and HTTP # requests in the background. The more there are, the more concurrent # connections can potentially be opened by computers, and the less likely # they are to delay each other. threads=4 # This is a list of whitelisted domain names. Requests may only be made # to addresses that are present in this list. If this list is empty, # requests may be made to all addresses not blacklisted. Note that the # blacklist is always applied, so if an entry is present in both the # whitelist and the blacklist, the blacklist will win. # Entries are of the same format as in the blacklist. Examples: # "gist.github.com", "www.pastebin.com" whitelist=[] } # Other settings that you might find useful to tweak. misc { # Allow robots to get a table representation of item stacks using the # inventory controller upgrade? (i.e. whether the getStackInSlot method # of said upgrade is enabled or not). Also applies to tank controller # upgrade and it's fluid getter method. allowItemStackInspection=true # List of item descriptors of assembler template base items to blacklist, # i.e. for disabling the assembler template for. Entries must be of the # format 'itemid@damage', were the damage is optional. # Examples: 'OpenComputers:case3', 'minecraft:stonebrick@1' assemblerBlacklist=[] # Hard limit for size of byte arrays passed to data card callbacks. If this # limit is exceeded, the call fails and does nothing. dataCardHardLimit=1048576 # Soft limit for size of byte arrays passed to data card callbacks. If this # limit is exceeded, a longer sleep is enforced (see dataCardTimeout). dataCardSoftLimit=8192 # Time in seconds to pause a calling machine when the soft limit for a data # card callback is exceeded. dataCardTimeout=1 # By default the disassembler can only be used to disassemble items from # OpenComputers itself (or objects whitelisted via the API). If you'd # like to allow the disassembler to work on all kinds of items, even from # other mods, set this to true. disassembleAllTheThings=false # The probability that an item breaks when disassembled. This chance # applies *per extracted item*. For example, if an item was crafted from # three other items and gets disassembled, each of those three items has # this chance of breaking in the process. disassemblerBreakChance=0.05 # Names of items / blocks that are blacklisted. Recipes containing these # as inputs will be ignored by the disassembler. disassemblerInputBlacklist=[ "minecraft:fire" ] # Controls how noisy results from the Geolyzer are. This is the maximum # deviation from the original value at the maximum vertical distance # from the geolyzer. Noise increases linearly with the euclidean distance # to the Geolyzer. geolyzerNoise=2 # The range, in blocks, in which the Geolyzer can scan blocks. Note that # it uses the maximum-distance, not the euclidean one, i.e. it can scan # in a cube surrounding it with twice this value as its edge length. geolyzerRange=32 # Whether to give a new player a free copy of the manual. This will only # happen one time per game, not per world, not per death. Once. If this # is still too much for your taste, disable it here ;-) giveManualToNewPlayers=true # Whether to not show your special thinger (if you have one you know it). hideOwnSpecial=false # Whether to pass along the name of the user that caused an input signals # to the computer (mouse and keyboard signals). If you feel this breaks # the game's immersion, disable it. # Note: also applies to the motion sensor. inputUsername=true # The probability (or rather, weighted chance) that a program disk is # spawned as loot in a treasure chest. For reference, iron ingots have # a value of 10, gold ingots a value of 5 and and diamonds a value of 3. # This is the chance *that* a disk is created. Which disk that will be # is decided in an extra roll of the dice. lootProbability=5 # Whether to allow loot disk cycling by crafting them with a wrench. lootRecrafting=true # The maximum length of a string that may be pasted. This is used to limit # the size of the data sent to the server when the user tries to paste a # string from the clipboard (Shift+Ins on a screen with a keyboard). maxClipboard=1024 # The maximum number of "data parts" a network packet is allowed to have. # When sending a network message, from Lua this may look like so: # component.modem.broadcast(port, "first", true, "third", 123) # This limits how many arguments can be passed and are wrapped into a # packet. This limit mostly serves as a protection for lower-tier # computers, to avoid them getting nuked by more powerful computers. maxNetworkPacketParts=8 # The maximum size of network packets to allow sending via network cards. # This has *nothing to do* with real network traffic, it's just a limit # for the network cards, mostly to reduce the chance of computer with a # lot of RAM killing those with less by sending huge packets. This does # not apply to HTTP traffic. maxNetworkPacketSize=8192 # The maximum number of ports a single network card can have opened at # any given time. # Note that the order for this list is: Wired Network Card -> Tier 1 Wireless # Network Card -> Tier 2 Wireless Network Card maxOpenPorts=[ 16, 1, 16 ] # The maximum height of multi-block screens, in blocks. This is limited to # avoid excessive computations for merging screens. If you really need # bigger screens it's probably safe to bump this quite a bit before you # notice anything, since at least incremental updates should be very # efficient (i.e. when adding/removing a single screen). maxScreenHeight=6 # The maximum width of multi-block screens, in blocks. # See also: `maxScreenHeight`. maxScreenWidth=8 # The maximum distance a wireless message can be sent. In other words, # this is the maximum signal strength a wireless network card supports. # This is used to limit the search range in which to check for modems, # which may or may not lead to performance issues for ridiculous ranges - # like, you know, more than the loaded area. # See also: `wirelessCostPerRange`. # These values are for the tier 1 and 2 wireless cards, in that order. maxWirelessRange=[ 32, 768 ] # Radius the MFU is able to operate in mfuRange=3 # Probablility that at certain celebratory times crafting an OC item will # spawn a present in the crafting player's inventory. Set to zero to # disable. presentChance=0.05 # Enforced delay when changing a redstone emitting component's output, # such as the redstone card and redstone I/O block. Lowering this can # have very negative impact on server TPS, so beware. redstoneDelay=0.1 # The general upgrade tier of the switch built into server racks, i.e. how # upgraded server racks' switching logic is. Prior to the introduction of # this setting (1.5.15) this was always none. This applies to all # properties, i.e. througput, frequency and buffer size. # Valid values are: 0 = none, 1 = tier 1, 2 = tier 2, 3 = tier 3. serverRackSwitchTier=1 # The number of remote terminals supported by each server tier. terminalsPerTier=[ 2, 4, 8 ] # Override for the worker threads' thread priority. If set to a value # lower than 1 it will use the default value, which is half-way between # the system minimum and normal priority. Valid values may differ between # Java versions, but usually the minimum value (lowest priority) is 1, # the normal value is 5 and the maximum value is 10. If a manual value is # given it is automatically capped at the maximum. # USE THIS WITH GREAT CARE. Using a high priority for worker threads may # avoid issues with computers timing out, but can also lead to higher # server load. AGAIN, USE WITH CARE! threadPriority=-1 # The maximum range between the drone/robot and a villager for a trade to # be performed by the trading upgrade tradingRange=8 # Whether to perform an update check and informing local players and OPs # if a new version is available (contacts Github once the first player # joins a server / the first map in single player is opened). updateCheck=true } # Nanomachine related values. Note that most of these are relative, as # they scale with the number of total effects controlled by nanomachines, # which may very much vary depending on other mods used together with OC. # To configure this, you'll need to know how this works a bit more in- # depth, so here goes: there are three layers, the behavior layer, the # connector layer, and the input layer. The behavior layer consists of # one node for each behavior provided by registered providers (by default # these will be potion effects and a few other things). The connector # layer merely serves to mix things up a little. The input layer is made # up from nodes that can be triggered by the nanomachines. Each connector # node has behavior nodes it outputs to, and gets signals from input nodes. # Behavior nodes get signals from both the connector and the input layers. # Reconfiguring builds up random connections. Some behaviors change what # they do based on the number of active inputs (e.g. potion effects will # increase their amplification value). nanomachines { # Time in seconds it takes for the nanomachines to process a command # and send a response. commandDelay=1 # The distance in blocks that nanomachines can communicate within. If # a message comes from further away, it'll be ignored. When responding, # the response will only be sent this far. commandRange=2 # The relative number of connectors based on the number of available # behaviors (see triggerQuota). connectorQuota=0.2 # Radius in blocks of the disintegration behavior for each active input. disintegrationRange=1 # How much damage the hungry behavior should deal to the player when the # nanomachine controller runs out of energy. hungryDamage=5 # How much energy the hungry behavior should restore when damaging the # player. hungryEnergyRestored=50 # Range of the item magnet behavior added for each active input. magnetRange=8 # The maximum number of inputs for each node of the "neural network" # nanomachines connect to. I.e. each behavior node and connector node # may only have up to this many inputs. maxInputs=2 # Hard maximum number of active inputs. This is mainly to avoid people # bumping other nanomachines' inputs to max, killing them in a matter # of (milli)seconds. maxInputsActive=4 # The maximum number of outputs for each node (see maxInputs). maxOutputs=2 # Whitelisted potions, i.e. potions that will be used for the potion # behaviors nanomachines may trigger. This can contain strings or numbers. # In the case of strings, it has to be the internal name of the potion, # in case of a number it has to be the potion ID. Add any potion effects # to make use of here, since they will all be disabled by default. potionWhitelist=[ speed, haste, strength, "jump_boost", resistance, "fire_resistance", "water_breathing", "night_vision", absorption, blindness, nausea, "mining_fatigue", "instant_damage", hunger, slowness, poison, weakness, wither ] # How many input nodes may be active at the same time before negative # effects are applied to the player. safeInputsActive=2 # The relative amount of triggers available based on the number of # available behaviors (such as different potion effects). For example, # if there are a total of 10 behaviors available, 0.5 means there will # be 5 trigger inputs, triggers being the inputs that can be activated # via nanomachines. triggerQuota=0.4 } # Power settings, buffer sizes and power consumption. power { # The amount of energy the robot assembler can apply per tick. This # controls the speed at which robots are assembled, basically. assemblerTickAmount=50 # Default "buffer" sizes, i.e. how much energy certain blocks can store. buffer { # The amount of energy an access point can store. accessPoint=600 # The amount of energy a capacitor can store when installed as an # upgrade into a robot. batteryUpgrades=[ 10000, 15000, 20000 ] # The amount of energy a single capacitor can store. capacitor=1600 # The amount of bonus energy a capacitor can store for each other # capacitor it shares a face with. This bonus applies to both of the # involved capacitors. It reaches a total of two blocks, where the # bonus is halved for the second neighbor. So three capacitors in a # row will give a total of 8.8k storage with default values: # (1.6 + 0.8 + 0.4)k + (0.8 + 1.6 + 0.8)k + (0.4 + 0.8 + 1.6)k capacitorAdjacencyBonus=800 # The amount of energy a computer can store. This allows you to get a # computer up and running without also having to build a capacitor. computer=500 # The amount of energy a converter can store. This allows directly # connecting a converter to a distributor, without having to have a # capacitor on the side of the converter. converter=1000 # The amount of energy each face of a distributor can store. This # allows connecting two power distributors directly. If the buffer # capacity between the two distributors is zero, they won't be able # to exchange energy. This basically controls the bandwidth. You can # add capacitors between two distributors to increase this bandwidth. distributor=500 # The amount of energy a drone can store in its internal buffer. drone=5000 # The internal buffer size of the hover boots. hoverBoots=15000 # The amount of energy a microcontroller can store in its internal # buffer. mcu=1000 # Amount of energy stored by nanomachines. Yeah, I also don't know # where all that energy is stored. It's quite fascinating. nanomachines=100000 # The amount of energy robots can store in their internal buffer. robot=20000 # The amount a tablet can store in its internal buffer. tablet=10000 } # Carpeted Capacitor settings # Carpeted Capacitors generate power when sheep or ocelots walk on them # Power is generated when at least 2 of a type of animal are present. # A single sheep and a single ocelot generates no power. Note that a # computer constantly flashing the screen from white to black drains # approximately 36 units of power per second. Thus, as an example with the # default values, it would take 12 carpeted capacitors and 24 sheep # (2 each) to keep the charge rate. Or, 6 carpeted capacitors and 12 # ocelots to do the same. Values are: units of power per carpeted # capacitor per second with 2 animals of a type. carpetedCapacitors { # Chance one animal (per capacitor) will take some damage per minute # Damage chance is only dealt when power is generated damageChance=0.001 # power generated from ocelots ocelotPower=6 # power generated from sheep sheepPower=3 } # The amount of energy a Charger transfers to each adjacent robot per tick # if a maximum strength redstone signal is set. Chargers load robots with # a controllable speed, based on the maximum strength of redstone signals # going into the block. So if a redstone signal of eight is set, it'll # charge robots at roughly half speed. chargerChargeRate=100 # The amount of energy a Charger transfers into a tablet, if present, per # tick. This is also based on configured charge speed, as for robots. chargerChargeRateTablet=10 # Default "costs", i.e. how much energy certain operations consume. cost { # The cost of a single packet sent via StargateTech 2's abstract bus. abstractBusPacket=1 # The amount of energy the chunkloader upgrade draws per tick while # it is enabled, i.e. actually loading a chunk. chunkloaderCost=0.06 # The amount of energy a computer consumes per tick when running. computer=0.5 # Cost for asymmetric operations on the data card, such as ECDH and ECDSA # Per-byte cost for ECDSA operation is controlled by `complex` value, # because data is hashed with SHA256 before signing/verifying dataCardAsymmetric=10 # Cost for complex operations on the data card, such as SHA256, inflate/deflate and SecureRandom. dataCardComplex=6 # Per-byte cost for complex operations dataCardComplexByte=0.1 # Cost for simple operations on the data card, such as MD5 or AES dataCardSimple=1 # Per-byte cost for simple operations dataCardSimpleByte=0.01 # Cost for trivial operations on the data card, such as CRC32 or Base64 dataCardTrivial=0.2 # Per-byte cost for trivial operations dataCardTrivialByte=0.005 # The amount of energy it takes to extract one ingredient from an # item that is being disassembled. For example, if an item that was # crafted from three other items gets disassembled, a total of 15000 # energy will be required by default. # Note that this is consumed over time, and each time this amount is # reached *one* ingredient gets ejected (unless it breaks, see the # disassemblerBreakChance setting). disassemblerPerItem=2000 # The amount of energy a drone consumes per tick when running. drone=0.4 # The base energy cost for assembling a drone. droneAssemblyBase=25000 # The additional amount of energy required to assemble a # drone for each point of complexity. droneAssemblyComplexity=15000 # Energy it costs to re-program an EEPROM. This is deliberately # expensive, to discourage frequent re-writing of EEPROMs. eepromWrite=50 # How much energy is consumed when the Geolyzer scans a block. geolyzerScan=10 # Energy it takes to clear a basic screen using the fill command with # 'space' as the fill char. # Note: internally this is adjusted to a cost per pixel, and applied # as such, so this also implicitly defines the cost for higher tier # screens. gpuClear=0.1 # Energy it takes to copy half of a basic screen via the copy command. # Note: internally this is adjusted to a cost per pixel, and applied # as such, so this also implicitly defines the cost for higher tier # screens. gpuCopy=0.25 # Energy it takes to change a basic screen with the fill command. # Note: internally this is adjusted to a cost per pixel, and applied # as such, so this also implicitly defines the cost for higher tier # screens. gpuFill=1 # Energy it takes to change *every* 'pixel' via the set command of a # basic screen via the `set` command. # Note: internally this is adjusted to a cost per pixel, and applied # as such, so this also implicitly defines the cost for higher tier # screens. gpuSet=2 # Energy it takes read one kilobyte from a file system. Note that non # I/O operations on file systems such as `list` or `getFreeSpace` do # *not* consume power. Note that this very much determines how much # energy you need in store to start a computer, since you need enough # to have the computer read all the libraries, which is around 60KB # at the time of writing. # Note: internally this is adjusted to a cost per byte, and applied # as such. It's just specified per kilobyte to be more intuitive. hddRead=0.1 # Energy it takes to write one kilobyte to a file system. # Note: internally this is adjusted to a cost per byte, and applied # as such. It's just specified per kilobyte to be more intuitive. hddWrite=0.25 # The amount of energy a hologram projetor consumes per tick. This # is the cost if every column is lit. If not a single voxel is # displayed the hologram projector will not drain energy. hologram=0.2 # The amount of energy consumed when the hover boots absorb some fall # velocity (i.e. when falling from something higher than three blocks). hoverBootAbsorb=10 # The amount of energy consumed when jumping with the hover boots. Only # applies when the jump boost is applied, i.e. when not sneaking. hoverBootJump=10 # The amount of energy consumed *per second* when moving around while # wearing the hover boots. This is compensate for the step assist, which # does not consume energy on a per-use basis. When standing still or # moving very slowly this also does not trigger. hoverBootMove=1 # Energy consumed by a MFU per tick while connected. # Similarly to `wirelessCostPerRange`, this is multiplied with the distance to the bound block. mfuRelay=1 # Amount of energy a microcontroller consumes per tick while running. microcontroller=0.1 # The base energy cost for assembling a microcontroller. microcontrollerAssemblyBase=10000 # The additional amount of energy required to assemble a # microcontroller for each point of complexity. microcontrollerAssemblyComplexity=10000 # Energy consumed per tick per active input node by nanomachines. nanomachineInput=0.5 # Energy consumed when reconfiguring nanomachines. nanomachinesReconfigure=5000 # The amount of energy pushing blocks with the piston upgrade costs. pistonPush=20 # How much energy is required for a single 3D print. printerModel=100 # The amount of energy a robot consumes per tick when running. This is # per default less than a normal computer uses because... well... they # are better optimized? It balances out due to the cost for movement, # interaction and whatnot, and the fact that robots cannot connect to # component networks directly, so they are no replacements for normal # computers. robot=0.25 # The base energy cost for assembling a robot. robotAssemblyBase=50000 # The additional amount of energy required to assemble a robot for # each point of complexity. robotAssemblyComplexity=10000 # The conversion rate of exhaustion from using items to energy # consumed. Zero means exhaustion does not require energy, one is a # one to one conversion. For example, breaking a block generates 0.025 # exhaustion, attacking an entity generates 0.3 exhaustion. robotExhaustion=10 # The amount of energy it takes a robot to move a single block. robotMove=15 # The amount of energy it takes a robot to perform a 90 degree turn. robotTurn=2.5 # The amount of energy a screen consumes per tick. For each lit pixel # (each character that is not blank) this cost increases linearly: # for basic screens, if all pixels are lit the cost per tick will be # this value. Higher tier screens can become even more expensive to # run, due to their higher resolution. If a screen cannot consume the # defined amount of energy it will stop rendering the text that # should be displayed on it. It will *not* forget that text, however, # so when enough power is available again it will restore the # previously displayed text (with any changes possibly made in the # meantime). Note that for multi-block screens *each* screen that is # part of it will consume this amount of energy per tick. screen=0.05 # The actual cost per tick for computers and robots is multiplied # with this value if they are currently in a "sleeping" state. They # enter this state either by calling `os.sleep()` or by pulling # signals. Note that this does not apply in the tick they resume, so # you can't fake sleep by calling `os.sleep(0)`. sleepFactor=0.1 # The base energy cost for assembling a tablet. tabletAssemblyBase=20000 # The additional amount of energy required to assemble a tablet for # each point of complexity. tabletAssemblyComplexity=5000 # Energy required for one transposer operation (regardless of the number # of items / fluid volume moved). transposer=1 # The amount of energy it costs to send a wireless message with signal # strength one, which means the signal reaches one block. This is # scaled up linearly, so for example to send a signal 400 blocks a # signal strength of 400 is required, costing a total of # 400 * `wirelessCostPerRange`. In other words, the higher this value, # the higher the cost of wireless messages. # See also: `maxWirelessRange`. # These values are for the tier 1 and 2 wireless cards, in that order. wirelessCostPerRange=[ 0.05, 0.05 ] } # The amount of energy the disassembler can apply per tick. This # controls the speed at which items are disassembled, basically. disassemblerTickAmount=25 # The energy efficiency of the generator upgrade. At 1.0 this will # generate as much energy as you'd get by burning the fuel in a BuildCraft # Stirling Engine (1MJ per fuel value / burn ticks). To discourage fully # autonomous robots the efficiency of generators is slighly reduced by # default. generatorEfficiency=0.8 # Whether to ignore any power requirements. Whenever something requires # power to function, it will try to get the amount of energy it needs from # the buffer of its connector node, and in case it fails it won't perform # the action / trigger a shutdown / whatever. Setting this to `true` will # simply make the check 'is there enough energy' succeed unconditionally. # Note that buffers are still filled and emptied following the usual # rules, there just is no failure case anymore. The converter will however # not accept power from other mods. ignorePower=false # If you don't want OpenComputers to accept power from one or more of the # supported power mods, for example because it doesn't suit the vision # of your mod pack, you can disable support for them here. To stop # OpenComputers accepting power from a mod, enter its mod id here, e.g. # `BuildCraftAPI|power`, `IC2`, `factorization`, ... modBlacklist=[] # The amount of energy the printer can apply per tick. This controls # the speed at which prints are completed, basically. printerTickAmount=1 # The rate at which different blocks accept external power. All of these # values are in OC energy / tick. rate { accessPoint=10 assembler=100 case=[ 5, 10, 20 ] charger=200 disassembler=50 powerConverter=500 serverRack=50 } # The energy efficiency of the solar generator upgrade. At 1.0 this will # generate as much energy as you'd get by burning fuel in a BuildCraft # Stirling Engine . To discourage fully autonomous robots the efficiency # of solar generators is greatly reduced by default. solarGeneratorEfficiency=0.2 # This determines how often continuous power sinks try to actually try to # consume energy from the network. This includes computers, robots and # screens. This also controls how frequent distributors revalidate their # global state and secondary distributors, as well as how often the power # converter queries sources for energy (for now: only BuildCraft). If set # to 1, this would query every tick. The default queries every 10 ticks, # or in other words twice per second. # Higher values mean more responsive power consumption, but slightly more # work per tick (shouldn't be that noticeable, though). Note that this # has no influence on the actual amount of energy required by computers # and screens. The power cost is directly scaled up accordingly: # `tickFrequency * cost`. tickFrequency=10 # Power values for different power systems. For reference, the value of # OC's internal energy type is 1000. I.e. the conversion ratios are the # values here divided by 1000. This is mainly to avoid small floating # point numbers in the config, due to potential loss of precision. value { AppliedEnergistics2=200 Factorization=13 # same as RedstoneFlux ForgeEnergy=100 Galacticraft=48 IndustrialCraft2=400 Mekanism=1333.33 PowerAdvantage=31.25 RedstoneFlux=100 # / 11256, same as AE2 RotaryCraft=200 } } # 3D printer related stuff. printer { # Whether Chamelium is edible or not. When eaten, it gives a (short) # invisibility buff, and (slightly longer) blindness debuff. chameliumEdible=true # The extra material cost involved for printing a model with a customized # redstone output, i.e. something in [1, 14]. customRedstoneCost=300 # The amount by which a printers ink buffer gets filled for a single # cartridge. Tweak this if you think printing is too cheap or expensive. # Note: the amount a single dye adds is this divided by 10. inkValue=50000 # The amount by which a printers material buffer gets filled for a single # chamelium. Tweak this if you think printing is too cheap or expensive. materialValue=2000 # The maximum light level a printed block can emit. This defaults to # a value similar to that of a redstone torch, because by default the # material prints are made of contains redstone, but no glowstone. # Prints' light level can further be boosted by crafting them with # glowstone dust. This is merely the maximum light level that can be # achieved directly when printing them. maxBaseLightLevel=8 # The maximum number of shape for a state of a 3D print allowed. This is # for the individual states (off and on), so it is possible to have up to # this many shapes *per state* (the reasoning being that only one state # will ever be visible at a time). maxShapes=24 # By what (linear) factor the cost of a print increases if one or both of # its states are non-collidable (i.e. entities can move through them). # This only influences the chamelium cost. noclipMultiplier=2 # Whether to enable print opacity, i.e. make prints have shadows. If # enabled, prints will have an opacity that is estimated from their # sampled fill rate. This is disabled by default, because MC's lighting # computation is apparently not very happy with multiple blocks with # dynamic opacity sitting next to each other, and since all prints share # the same block type, this can lead to weird shadows on prints. If you # don't care about that and prefer them to be not totally shadowless, # enable this. printsHaveOpacity=false # How much of the material used to print a model is refunded when using # the model to refuel a printer. This the value the original material # cost is multiplied with, so 1 is a full refund, 0 disables the # functionality (won't be able to put prints into the material input). recycleRate=0.75 } # Robot related settings, what they may do and general balancing. robot { # Whether robots may 'activate' blocks in the world. This includes # pressing buttons and flipping levers, for example. Disable this if it # causes problems with some mod (but let me know!) or if you think this # feature is too over-powered. allowActivateBlocks=true # Whether robots may use items for a specifiable duration. This allows # robots to use items such as bows, for which the right mouse button has # to be held down for a longer period of time. For robots this works # slightly different: the item is told it was used for the specified # duration immediately, but the robot will not resume execution until the # time that the item was supposedly being used has elapsed. This way # robots cannot rapidly fire critical shots with a bow, for example. allowUseItemsWithDuration=true # Whether robots may damage players if they get in their way. This # includes all 'player' entities, which may be more than just real players # in the game. canAttackPlayers=false # Allows fine-tuning of delays for robot actions. delays { # The time in seconds to pause execution after an item was # successfully dropped from a robot's inventory. drop=0.5 # This is the *ratio* of the time a player would require to harvest a # block. Note that robots cannot break blocks they cannot harvest. So # the time a robot is forced to sleep after harvesting a block is # breakTime * harvestRatio # Breaking a block will always at least take one tick, 0.05 seconds. harvestRatio=1 # The time in seconds to pause execution after a robot issued a # successful move command. Note that this essentially determines how # fast robots can move around, since this also determines the length # of the move animation. move=0.4 # The time in seconds to pause execution after a robot successfully # placed an item from its inventory. place=0.4 # The time in seconds to pause execution after a robot successfully # picked up an item after triggering a suck command. suck=0.5 # The time in seconds to pause execution after a robot successfully # swung a tool (or it's 'hands' if nothing is equipped). Successful in # this case means that it hit something, i.e. it attacked an entity or # extinguishing fires. # When breaking blocks the normal harvest time scaled with the # `harvestRatio` (see below) applies. swing=0.4 # The time in seconds to pause execution after a robot turned either # left or right. Note that this essentially determines hw fast robots # can turn around, since this also determines the length of the turn # animation. turn=0.4 # The time in seconds to pause execution after a robot successfully # used an equipped tool (or it's 'hands' if nothing is equipped). # Successful in this case means that it either used the equipped item, # for example a splash potion, or that it activated a block, for # example by pushing a button. # Note that if an item is used for a specific amount of time, like # when shooting a bow, the maximum of this and the duration of the # item use is taken. use=0.4 } # The rate at which items used as tools by robots take damage. A value of # one means that items lose durability as quickly as when they are used by # a real player. A value of zero means they will not lose any durability # at all. This only applies to items that can actually be damaged (such as # swords, pickaxes, axes and shovels). # Note that this actually is the *chance* of an item losing durability # when it is used. Or in other words, it's the inverse chance that the # item will be automatically repaired for the damage it just took # immediately after it was used. itemDamageRate=0.1 # Limit robot flight height, based on the following rules: # - Robots may only move if the start or target position is valid (e.g. # to allow building bridges). # - The position below a robot is always valid (can always move down). # - Positions up to above a block are valid (limited # flight capabilities). # - Any position that has an adjacent block with a solid face towards the # position is valid (robots can "climb"). # Set this to 256 to allow robots to fly whereever, as was the case # before the 1.5 update. Consider using drones for cases where you need # unlimited flight capabilities instead! limitFlightHeight=8 # The name format to use for robots. The substring '$player$' is # replaced with the name of the player that owns the robot, so for the # first robot placed this will be the name of the player that placed it. # This is transitive, i.e. when a robot in turn places a robot, that # robot's owner, too, will be the owner of the placing robot. # The substring $random$ will be replaced with a random number in the # interval [1, 0xFFFFFF], which may be useful if you need to differentiate # individual robots. # If a robot is placed by something that is not a player, e.g. by some # block from another mod, the name will default to 'OpenComputers'. nameFormat="$player$.robot" # Determines whether robots are a pretty cool guy. Ususally cobwebs are # the bane of anything using a tool other than a sword or shears. This is # an utter pain in the part you sit on, because it makes robots meant to # dig holes utterly useless: the poor things couldn't break cobwebs in # mining shafts with their golden pick axes. So, if this setting is true, # we check for cobwebs and allow robots to break 'em anyway, no matter # their current tool. After all, the hardness value of cobweb can only # rationally explained by Steve's fear of spiders, anyway. notAfraidOfSpiders=true # The 'range' of robots when swinging an equipped tool (left click). This # is the distance to the center of block the robot swings the tool in to # the side the tool is swung towards. I.e. for the collision check, which # is performed via ray tracing, this determines the end point of the ray # like so: `block_center + unit_vector_towards_side * swingRange` # This defaults to a value just below 0.5 to ensure the robots will not # hit anything that's actually outside said block. swingRange=0.49 # The maximum flight height with upgrades, tier one and tier two of the # hover upgrade, respectively. upgradeFlightHeight=[ 64, 256 ] # The 'range' of robots when using an equipped tool (right click) or when # placing items from their inventory. See `robot.swingRange`. This # defaults to a value large enough to allow robots to detect 'farmland', # i.e. tilled dirt, so that they can plant seeds. useAndPlaceRange=0.65 # Controls the UUID robots are given. You can either specify a fixed UUID # here or use the two provided variables: # - $random$, which will assign each robot a random UUID. # - $player$, which assigns to each placed robot the UUID of the player # that placed it (note: if robots are placed by fake players, i.e. # other mods' blocks, they will get that mods' fake player's profile!) # Note that if no player UUID is available this will be the same as # $random$. uuidFormat="$player$" # This controls how fast robots gain experience, and how that experience # alters the stats. xp { # This controls how much experience a robot gains for each successful # action it performs. "Actions" only include the following: swinging a # tool and killing something or destroying a block and placing a block # successfully. Note that a call to `swing` or `use` while "bare handed" # will *not* gain a robot any experience. actionXp=0.05 # The required amount per level is computed like this: # xp(level) = baseValue + (level * constantGrowth) ^ exponentialGrowth baseValue=50 # This is the amount of additional energy that fits into a robots # internal buffer for each level it gains. So with the default values, # at maximum level (30) a robot will have an internal buffer size of # two hundred thousand. bufferPerLevel=5000 # The required amount per level is computed like this: # xp(level) = baseValue + (level * constantGrowth) ^ exponentialGrowth constantGrowth=8 # This determines how much "exhaustion" contributes to a robots # experience. This is additive to the "action" xp, so digging a block # will per default give 0.05 + 0.025 [exhaustion] * 1.0 = 0.075 XP. exhaustionXpRate=1 # The required amount per level is computed like this: # xp(level) = baseValue + (level * constantGrowth) ^ exponentialGrowth exponentialGrowth=2 # The increase in block harvest speed a robot gains per level. The time # it takes to break a block is computed as actualTime * (1 - bonus). # For example at level 20, with a bonus of 0.4 instead of taking 0.3 # seconds to break a stone block with a diamond pick axe it only takes # 0.12 seconds. harvestSpeedBoostPerLevel=0.02 # This determines how much experience a robot gets for each real XP orb # an ore it harvested would have dropped. For example, coal is worth # two real experience points, redstone is worth 5. oreXpRate=4 # The additional "efficiency" a robot gains in using tools with each # level. This basically increases the chances of a tool not losing # durability when used, relative to the base rate. So for example, a # robot with level 15 gets a 0.15 bonus, with the default damage rate # that would lead to a damage rate of 0.1 * (1 - 0.15) = 0.085. toolEfficiencyPerLevel=0.01 } } # Switch and access point network message forwarding logic related stuff. switch { # This is the size of the queue of a not upgraded switch. Increasing it # avoids packets being dropped when many messages are sent in a single # burst. defaultMaxQueueSize=20 # The base number of packets that get relayed in one 'cycle'. The # cooldown between cycles is determined by the delay. defaultRelayAmount=1 # The delay a switch has by default between relaying packets (in ticks). # WARNING: lowering this value will result in higher maximum CPU load, # and may in extreme cases cause server lag. defaultRelayDelay=5 # This is the amount by which the queue size increases per tier of the # hard drive installed in the switch. queueSizeUpgrade=10 # The number of additional packets that get relayed per cycle, based on # the tier of RAM installed in the switch. For built-in RAM this # increases by one per half-tier, for third-party ram this increases by # two per item tier. relayAmountUpgrade=1 # The amount of ticks the delay is *reduced* by per tier of the CPU # inserted into a switch. relayDelayUpgrade=1.5 } # The version of OC this config was generated by. This is used to allow the # mod to reset parts of the config when their meaning changed across # versions, so that the user does not have to delete it. version="1.7.5.192" }