11 lines
486 B
Markdown
11 lines
486 B
Markdown
# LED Driver
|
|
|
|
A simple PCB I made to drive a LED (strip) using an AL8843.
|
|
|
|
This board features a high/low brightness pull-down, as well as an On/Off pull-down.
|
|
|
|
The board by default is configured to 1A current. To change this, swap R9 with an appropriate resistor using the formula `Amps=0.1/R9`.
|
|
The board is designed to handle up to 2A of current continuously.
|
|
|
|
## License
|
|
This repository is licensed under the [CC BY-SA 4.0 License](https://creativecommons.org/licenses/by-sa/4.0/).
|